收藏本站
PICkit? Serial Analyzer User’s Guide
10.3.2
Returns :
Inputs :
Note:
10.3.3
Returns :
Inputs :
PICkitS.Basic.Configure_PICkitSerial(int p_mode, bool p_reset)
True if successful, False if not
p_mode: the communications mode where:
0 = IDLE
1 = I 2 CM
2 = SPI-M
3 = SPI-S
4 = USART-A
5 = USART-SM
6 = USART-SS
7 = I 2 CS
8 = 1 2 CBBM
9 = 1 2 CSBBM
p_reset: whether or not to perform a Reset of the PICkit? Serial after
changing modes
Unless performing certain test routines on the PICkit? Serial Analyzer, p_reset
should always be TRUE
PICkitS.Basic.There_Is_A_Status_Error(ref uint p_error)
True if any status error bit is set, False if not
Reference to an unsigned int (32-bit)
Description :
Looks at the latest Status_Packet data stored in the class library and copies
the Exec status into byte 0 , Comm status into byte 1, and comm-mode specific
status (I 2 C, SPI, etc.) into byte 2. Byte 3 is left blank for future use. If any bit in
any of the bytes is set, this indicates an error and a True value is returned.
10.3.4
Returns :
Inputs :
PICkitS.Basic.Configure_PICkitSerial_For_I2C()
True if successful, False if not
None
Description :
Configures PICkit?
Serial
control
block
for
I2C_M
(I 2 C
Master)
communication
10.3.5
Returns :
Inputs :
PICkitS.Basic.Get_Status_Packet(ref byte[] p_status_packet)
True if the status packet is successfully updated, False if there is an error
updating the status packet.
p_status_packet - Reference to an array of bytes. The array must be at least
65 bytes long to hold the status packet data.
Description :
Issues a command to update the Status Packet stored in the class library and
copy it to p_status_packet. Call this function to get detailed information
regarding the status block and control block of the PICkit? Serial. Refer to
Chapter 9 to see the format of the Status Packet.
10.3.6
Returns :
Inputs :
PICkitS.Basic.Initialize_PICkitSerial()
True if successful, False if not
None
DS51647A-page 96
Description :
Attempts to establish communication with PICkit? Serial Analyzer and initial-
ize communication threads used by class library. If multiple PICkit? Serial
Analyzers are attached to host PC, function will only initialize first one it finds.
? 2007 Microchip Technology Inc.
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
DV164131 KIT STARTER PICKIT 3
DV164132 KIT EVAL F1 FOR PIC12F1/PIC16F1
DV243003 KIT STARTER FOR SRL MEM PRODUCTS
DVA1001 ADAPTER FOR PIC16F716 18DIP
DVA1004 DEVICE ADAPTER 8/14/20DIP
E3R-D12GP-P RELAY RCVR PLUG-IN DIMMER
E3R-R12-3HOTP RCVR 3WIRE RELAY 120V
E3R-R12GP RCVR PLUG-IN RELAY
相关代理商/技术参数
DV164126 功能描述:开发板和工具包 - PIC / DSPIC USB Kit w/ PICkit LowPinCount RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DV164130 功能描述:电路内置调试器 PICkit 3 Starter Kit RoHS:否 制造商:Microchip Technology 产品:In-Circuit Debugger Kits 工具用于评估:PIC16F1829 用于:PIC16F1829 核心:PIC 接口类型: 工作电源电压:
DV164131 功能描述:电路内置调试器 PICkit 3 Debug Exprs RoHS:否 制造商:Microchip Technology 产品:In-Circuit Debugger Kits 工具用于评估:PIC MCUs, dsPIC DSCs 用于:07-00024, AC164113 核心:dsPIC, PIC 接口类型:USB 工作电源电压:3 V to 5 V
DV164131 制造商:Microchip Technology Inc 功能描述:PICKIT 3 DEBUG EXPRESS
DV164131-XLP 制造商:Microchip Technology Inc 功能描述:KIT DEV PICKIT 3-XLP/NANOWAT
DV164132 功能描述:开发板和工具包 - PIC / DSPIC F1 Evaluation Kit RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DV164132 制造商:Microchip Technology Inc 功能描述:PIC12F1xxx/PIC16F1xxx F1 Evaluation Kit
DV164133 功能描述:电源管理IC开发工具 Energy Harvesting Development Tool RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V